Whoever found and cited [10] is doing God’s work lol.
Whoever found and cited [10] is doing God’s work lol.
Ah, ok. The Unifi stuff is a bit weird like that. I recommend installing the controller on a computer if you continue to have issues. You don’t have to run it all the time, just use it for config and then turning it off is fine. It’ll give you way more information and control over exactly how the AP is set up.
Which model is it? As far as I’m aware all the Unifi APs need the controller for config. It doesn’t need to stay running unless you want a couple features for large deployments but you do need to run it to set things up initially. The Air Max / uisp lines are the ones with web based config.
Do you have a continuously running unifi controller or is it only running when you do the config? Does it do the same thing with the controller opposite to how it is now (ie if you aren’t running it does it do it when you leave the controller on)?
Are you running the 2.4 and 5 as separate SSIDs or the same one?
Are you on the latest controller and firmware?
I thought this was a Mystery Flesh Pit National Park post for a second.
I think you just invented Windows 13.
To be fair 10ths are a thing in surveying. And occasionally engineering I guess but I’ve never seen it.
I want a ruler in 3rds just to mess with people now though.
To be fair there’s a Linux version of the bedrock server. But yeah not having it on the steam deck is pretty annoying.
To be fair I’d call it a wash. Bedrock fixes a lot of weird stuff like quasi connectivity and being able to push things like chests with pistons but also introduces it’s own bugs like weird timing things and randomly taking fall damage. There’s also weird differences like being able to do things with cauldrons or just like minor texture differences that they are slowly bringing into sync.
Because Bedrock runs on phones, tablets, consoles, and a host of other random crap, and does so relatively well. Because of that the install base and playtime especially among younger players is actually massively skewed toward Bedrock being the more used. Add to that rumors that the Java codebase at least was a terrible mess, and the performance issues Java edition still has to this day and it’s no wonder they wanted to do a full rewrite, especially after having to make things like the console editions and even one for the 3DS.
The windows launcher is annoying though.
If I remember correctly, it’s not the freezing point. Fahrenheit used a brine that included ammonium chloride to set 0 on his scale since it was the closest thing he could make in his lab that was a consistent temperature. The other end was body temperature, which he set at 96 if I’m remembering right since it’s more easily divisible than 100. He was a little off on his body temperature measurements so it’s considered a little higher than that now.
Yeah newsprint would be a pain in an inkjet depending on exactly what it’s like. It might not even be much thinner, it’s often a little “fluffy” so it can be printed fast.
If you take it in somewhere and get it spiral / coil bound that’s probably your best bet if you don’t want to do a binder. You can do it yourself but you basically need a little desktop machine to do the punching which is annoying unless you’re doing it regularly.
Traditional hardcover probably won’t work for you. That involves printing a bunch of booklets called signatures then sewing them together and it’s a whole thing. Basically there’s a reason well made hardcover books are expensive.
You could do perfect or tape binding pretty easy though. Essentially you glue all the edges to a backing and then wrap a cover around it. It works ok for low usage, but if you want it to lay flat or hold up to abuse you’ll have problems. You can kind of mitigate that by using a gpod spine backing but it’s not a perfect solution. If the copy you have isn’t already laid out for printing it may be worth it to edit it a bit so the contents are farther from the spine if you do that, but it makes printing a bit more complicated.
So, I’ve never pirated a book but I do have some printing and binding knowledge, so some of this might be off base.
If the original book isn’t fully chungus it’s probably printed on a low weight newsprint, a low weight coated paper, or something weird like vellum or scritta. Problem is most of that is going to be specialty and only really available in rolls or large sheets through a distributor.
Most of the thinner stuff you’ll be able to find in sheets has become a thing with fountain pen lovers. Look for Tomoe River or Bank paper. They are in the 50gsm range and should be a bit thinner than normal 75ish gsm copy paper. It’s going to be way more expensive than normal printer paper but it should be thinner. The other issue is actually getting your printer to reliably print on thinner paper. Home printers, especially inkjets, really don’t deal with thin paper particularly well. Lasers usually do better since they tend to use a different paper pickup and path, but they can still have issues.
Your printer should have a thin paper setting to reduce the amount of ink that it uses so you don’t get as much bleed. The other thing you’ll have to look out for is that those papers will take longer to dry than normal paper, so if your printer has a drying time you’ll probably need to set it as high as it will go. You might even want to wait a day before flipping it over for the duplex print. Which you definitely should some that will literally halve the size of the book. It will probably be fine anyway since this is likely a multi day project just given how long it will take to spit 1000 pages out of an inkjet.
Unless you absolutely need to have the whole thing with you all the time, I would consider printing it in volumes. Even if you duplicate sections like an index or glossary or reference section or whatever, you’re still probably going to have a lot less trouble and maybe spend less.
I continue to contend that Weird Al would put on the greatest Superbowl halftime show of all time.
We should defederate with any server that has less than 7 degrees of separation with Meta. We can call it the Kevin Bacon rule.
To be fair, I don’t think satire in any way is bad, or that it should be dumbed down - but there are often legitimate issues with the way it’s seen to the point of it becoming a meme.
I’d love some kind of per community bias adjustment even for subscribed communities. Like, I don’t really want to remove them cause memes are great, but because !memes@lemmy.world and 196 post so often my subscribed feed is pretty dominated by them no matter how I sort it.
For “All” some kind of adjustment based on subscribers makes sense, but I don’t even know if that’s possible given the way Lemmy works. Maybe a “show me less” button that moves the same bias adjustment just for communities you’re not subscribed to?
I don’t see why not. Hot dogs are generally pre-cooked, you can eat a cold one straight out of the package. The real question is if you made coffee instead of water would you get a coffee flavor caffeinated dog?