Not to be an unfunny nitpicker (I don’t know why I’m denying this, that kinda the whole point), but all iphones do have lossless audio streaming via AirPlay. I’m assuming that you specifically meant Bluetooth streaming, but then you should’ve said so. Furthermore, normal aptx isn’t high resolution, only aptx HD and aptx adaptive are. The phone does support aptx HD as well, but once again, you could’ve said so from the start (though 3 characters more or less might make a significant difference to most memes, this one certainly wouldn’t have had that problem)

Luxury! My homeserver has an i5 3470 with 6GB or RAM (yes, it’s a cursed 4+2 setup)! </badMontyPythonReference>

Interesting, I also run Nextcloud and pihole, and vaultwarden, jellyfin, paperless-ngx, gitea, vscode-server and a minecraft server (every now and then).

You’re right that such a system really does show its age, but only when doing multiple intensive tasks at the same time. I try not to backup my photos to Nextcloud while running minecraft, for example, as the imagine identification task pins my CPU at 100%. So yes, I agree, you’re probably not doing anything out of the ordinary on your setup.

The point I was trying to make still stands though, as that pi 2B could run more than I would’ve expected beforehand. I believe it once even ran jellyfin, a simple file server, samba, and a webserver with a simple HTML website. Jellyfin worked just fine, as long as the pi didn’t have to transcode (never got hardware transcoding to work).

It is funny that you should run out of memory, seeing as everything fits (albeit, just barely) on my machine in 1/5 the memory. Would de overhead of running VM’s account for such a large difference?

Coming from someone who started selfhosting on a pi 2B (similar-ish specs), you’d be surprised. If you don’t need anything fast or fancy, that 1GB will go a long way, and plenty of selfhosted apps require very little CPU. The only real problem I faced was that all HTTPS-related network tasks were limited at ~3MB/s, as that is how fast my pi could encrypt the data (presumably, I just saw my webserver utilising the entire CPU and figured this was the most likely explanation)

It depends what you’re optimising for. If you want a single (relatively small) download to be available on your HDD as fast as possible, then your current setup might be better (optimising for lower latency). However, if you want to be maxing out your internet speeds at all time and increase your HDD speeds by making the copy sequential (optimising for throughput), then the setup with the catch drive will be better. Keep in mind that a HDD’s sequential write performance is significantly higher than its random write performance, so copying a large file in one go will be faster than copying a whole bunch of random chunks in a random order (like torrents do). You can check the difference for yourself by doing a disk benchmark and comparing the sequential vs random writes of your drive.

qBittorrent has exactly the option you’re looking for, I believe it’s called “incomplete download path” in the settings, letting you store incomplete downloads at a temporary path and moving them to their regular location when the download finishes. Aside from the download speed improvement, this will also lead to less fragmentation on your HDD (which might be part of the reason why it is so slow when downloading directly to it). Pre-allocating space could have the same effect, but I would recommend only using one of these two solutions at once (pre-allocating space on your SSD would only waste space)

It’s possible for a certain hardware/software setup not to support a certain codec. For example, my jellyfin client (Finamp) uses the iOS native decoders (afaik), which means opus files are practically broken. My music library (8000+ songs) contained exactly 1 lossy file, which just so happened to be an opus file. I decided to spend the extra ~20MB to standardise my entire library to flac files, ensuring I could play every song on all my devices.

Edit cause I posted too soon: you are generally correct; only in very specific circumstances will you encounter compatibility issues like this one in the modern world. This is 100% apple being apple, and you can expect pretty much every other (reasonably modern) device to support all codecs you might encounter in the wild.

To add to the audio compression: it isn’t possible to further compress an mp3 file without losing any quality. You can either:

1. Recompress to a lossy codec (mp3, aac, opus). This will lead to smaller file sizes if you set the bitrate lower than that of the input file, but it will always worsen the quality, no matter the bitrate.
2. Recompress to a lossless format (flac easily being the best one). Going from a lossy to a lossless format will increase the file size (sometimes by quite a substantial amount), while keeping the same quality. There is very little reason for you to do this
3. keep the original files (my recommendation)

If you’re willing to spend some extra time learning about audio compression, you can download lossless files and compress those directly to whatever format and bitrate you want. The quality will be better than option 1 above, as the audio is only lossely compressed once instead of twice.

“cis” and “trans” are prefixes denoting on what “side” something is. “cis” means “on this/our side”, while “trans” refers to “the other side”, for example:

1. “Cisalpina” is how the Romans referred to their side of the Alps (modern day Italy), while “Transalpina” referred to land on the other side of the alps.
2. There exist certain pairs of molecules with either a “cis” or “trans” prefix, depending on whether certain identical groups are on the same side or on opposite sides, respectively.

The modern use of “cis” and “trans” is generally about gender. A cisgender person is someone whose gender identity aligns with their sex assigned at birth, while a transgender person is someone for whom that doesn’t hold true.

In this meme, the person on the right is wearing a transgender flag for a shirt, and presumably offending the cisgender person on the left by calling them cis. The meme is making fun of the fact that some cisgender people consider “cis” an insult, when it really only is a neutral and non-offensive description.

Which compression level are you using? My old server is able to compress flac’s at the highest (and therefore “slowest”) compression level at >50x speed, so bumping the level up shouldn’t be too hard on your CPU.

I’ve been running some external drives on my server for about a year now. In my experience, hard drives with an external power supply suffer less from random disconnects. The specific PC also makes quite a large difference in reliability. My server is just a regular desktop and has very little problem staying connected and powering my 3 external drives. My seedbox is an old laptop, and has been having almost constant problems with random disconnects and power issues. Maybe test how well your framework does with some external drives before committing to the plan?

Except safari of course (almost 20% market share).

Also, there are plenty of other browsers using Mozilla’s gecko engine. A quote from Wikipedia: “ Other web browsers using Gecko include GNU IceCat, Waterfox, K-Meleon, Lunascape, Portable Firefox, Conkeror, Classilla, TenFourFox.” (https://en.m.wikipedia.org/wiki/Gecko_(software))

No problem! It actually seems like a great guide, especially for beginners, I might link it to some friends.

Just out of curiosity, are you sure “fd” is the right command in the “format storage” section? I don’t have a rasbian system to test this on, but on my arch system, “df” is used to list disks; “fd” is a multithreaded version of “find”, which I manually installed.

To add to this with another example: my server runs

• jellyfin
• Nextcloud
• gitea
• Monica (a CRM, look it up on awesome-selfhosted)
• vaulwarden (rust implementation of Bitwarden)
• code-server
• qBitTorrent-nox
• authelia (2FA)
• pihole
• smbd
• sshd
• Caddy

In total, I’m using about 1.5GB out of 6GB of RAM (with another 1GB out of 16GB of swap being used), and the idle CPU usage is only 1%-ish (i5-3470 with the BIOS-settings set to power saving).

Even on very old and low-powered hardware, you can still run a lot of services without any problems.

It depends on your linker. By default, Firefox appears to use the LLD linker. There is a faster one available, which runs perfectly fine on my 16GB machine: https://github.com/rui314/mold. After installing, it can be enabled by setting —enable-linker=mold instead of —enable-linker=lld

There is an “TI-nspire CXII connect” web app from Texas Instruments themselves. You can find it by going to the webpage of your calculator, and then going to the software section (https://education.ti.com/en/products/calculators/graphing-calculators/ti-nspire-cx-ii-cx-ii-cas/software-overview). If you scroll down far enough (past all the teacher/student software) you’ll see a small section about nspire connect. This should lead you to the following website: https://nspireconnect.ti.com/?ref_url=https%3A%2F%2Feducation.ti.com%2Fen%2Fproducts%2Fcalculators%2Fgraphing-calculators%2Fti-nspire-cx-ii-cx-ii-cas%2Fsoftware-overview. This should allow you to update your OS, send and receive files, etc.