I’ve had a home server for years, at first using Windows Server, then Unraid, and now using Ubuntu server. I’ve long known that I should keep a close eye on my spinning rust, but I never really knew the best way to have that monitoring quietly automated in the background, only sending me a message when something bad shows up. If it matters at all (I assume it doesn’t) I am using ZFS on Ubuntu (but not using ZFS as root. It’s mounted in e.g ~/user/storage. My primary drive is an SSD)

What are you all using for hard drive monitoring? What are you using for notifications and (generally) how are you linking those two together?

    • UFO64@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      1 year ago

      So just as an FYI to those who trust these sorts of things, SMART technology is a self reporting thing. The hard drive is more than capable of lying to the data in that system if it protects the manufacture from responsibility of replacing faulty drives. Whats more, it’s actually pretty rare that SMART reports and issue before the drive just sorta… dies someway or another.

      It’s not useless technology, but it’s pretty damn close. I don’t even both with any of my setups. I test it by monitoring if the server has issues reading/writing. SMART wont tell me anything before that will.

      Source: Was a firmware engineer on hard drives for 10 years.

      • easeKItMAn@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        1 year ago

        SMART value monitoring helped me finding faulty drives, not only once. And drives are tested before adding to a production system.
        Certainly system drives are separate from data drives. The latter can be perfectly monitored by SMART values.

        • UFO64@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Have done years of enterprise fault analysis, I promise you that SMART will happily tell you there is a problem at the same time you begin to experience data corruption. You might get lucky and catch and altered sector count spike up, or a temperature value go out of family, but in the field those things really suck at predictions.

          If you want to know if a drive is healthy, track data corruption at the file system layer.

          • easeKItMAn@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            1 year ago

            I think you can’t track data corruption either because you will find out only when it occurred. Same is valid for SMART values as you correctly state. I believe it is a mix of using zfs, ECC and SMART monitoring.
            https://phoenixnap.com/blog/data-corruption

            Thanks for clarifying the intricacies connected to SMART monitoring.

        • UFO64@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          If I care about the data? It’s on a file system which reports file corruption.

          Otherwise? I don’t trust it at all. I back it up and replace the drive when it dies.

          • Shrek@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            A file system that reports file corruption. I believe ZFS is one of those? I’m not really familiar with how that works

  • Avid Amoeba@lemmy.ca
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    1 year ago

    Ingredients

    • A 10-line Python script that parses the zpool status and looks for errors
    • A systemd one-shot service that runs it and puts the output into node_exporter
    • A systemd timer that runs the service every 5 minutes
    • A Prometheus container that among other things has an alert for changes in the zpool health data

    Result

    Once this is setup, it’s trivial to add other checks like smartmontools, etc. If you add Alertmanager, you can get emails and other alerts sent to you while you’re not looking.

  • steel_moose@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I just have a shell-script running daily that runs the smartctl short test and checks certain S.M.A.R.T. values and pings healthchecks.io when successful. Easy and seems to do the job.

  • vividspecter@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    smartd + email to mailrise which sends notifications to a self hosted gotify instance. I then get notifications through the gotify mobile app and on the web interface.