I am thinking of extending my storage and I don’t know if I should buy a JBOD (my current solution) or a RAID capable enclosure.
My “server” is just a small intel nuc with an 8th gen i3. I am happy with the performance, but that might be impacted by a bigger software RAID setup. My current storage setup is a 4-bay JBOD with 4TB drives in RAID 5. And I am thinking of going to 6 x 8TB drives with RAID 6 which will probably be more work for my little CPU
Normally I would say software, or rather a raid-like filesystem like btrfs or ZFS. But in your specific case of funneleing it all through a single usb-c connection it is probably better to keep using an external box that handles it all internally.
That said, the CPU load of software raid it very small, so that isn’t really something to be concerned with, but usb connections are quite unstable and not good for directly connecting drives in a raid.
I mean I’ve been running the setup this way for >4 years and never had any problem with the USB connection, so I cannot attest to “usb connections are quite unstable”…
I supposed that is because the JBOD box was handling the raid internally so short connection issues are not that problematic and can be recovered from automatically. But that wouldn’t be the case if you connected everything together with a usb hub and usb to sata adapters and run a software raid on that.
I read somewhere, years ago, that RAID6 takes about 2 cores, on a working server.
That may have been a decade ago, and hardware’s improved significantly since then.
Bet on 1 core being saturated, min, with heavy use of a RAID6 or Z2 array, I suspect…
I’d go with software raid, not hardware: with hardware RAID, a dead array, due to a dead controller-card, means you need EXACTLY the same card, possibly the same firmware-revision, to be able to recover the RAID.
With mdadm, that simply isn’t a problem: mdadm can always understand mdadm RAID’s.
_ /\ _
